For routine cleaning of no-wax vinyl, ceramic, marble, granite, terrazzo, slate and stone floors. No rinsing required. Leaves no dulling film, economical, concentrated formula. Won't hurt ceramic tile grout. Keep from freezing.
Use For:
- All Armstrong residential no-wax vinyl flooring
- Formica and fiberglass
- Asphalt tile (properly diluted only - do not use full strength)
- Ceramic, marble, granite and slate (properly diluted only - do not use full strength)
- Terrazzo - (properly diluted only - do not use full strength)
- Do Not Use For: Linoleum, hardwood or cork
VOC:
VOC content: 6.2% as sold; 0.47% as used; California General Consumer Products Rule, California Code of Regulations
=========================================
DIRECTIONS FOR USE
DIRECTIONS FOR 1/2 GALLON (64 fl oz.) CONTAINER:
ROUTINE CLEANING :
Mix 1/4 cup to 1 gallon of warm water
Wash floor with mop (sponge, microfiber or similar type of mop)
No rinsing required
EXTRA-STRENGTH CLEANING:
Mix 1&1/4 cup to 1 gallon of warm water
Wash floor with mop (sponge, microfiber or similar type of mop)
No rinsing required
TOUGH SPOTS:
Use full strength except over ceramic tile
Let soak at least 2 to 3 minutes
Loosen dirt with nylon pad or scrub brush
Wipe with clean, damp cloth or sponge
HOUSEHOLD HINT:
If your floor has lost its original shine, clean with Once 'n Done Floor Cleaner. Apply Armstrong Shinekeeper or Satinkeeper Floor Polish, then use Once 'n Done regularly.
Do not use on linoleum, hardwood or cork floors.
