•Exceptional bond strength provides a smooth finish to a variety of substrates prior to floor covering
•Easy to mix and apply mixes with water only, no primers or additives necessary
•True featheredge allows for greater coverage
•Mold and mildew resistant will not contribute to staining of floor covering
Ardex Feather Finish mixes to a creamy, smooth finish underlayment that eliminates flooring installation problems associated with disbonding, crumbling, mold, mildew and staining. It is formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates including sheet vinyl and VCT. Install over concrete, masonry, wood, terrazzo, and ceramic and quarry tile - as well as properly prepared residues of cutback and other non-water-soluble adhesives on concrete all without the need for priming or the use of a latex additive. Covers up to 300 sq ft per bag Install floor coverings in as little as 15 minutes. Mixes with water only. Exceptional bond strength. Easy to mix and apply. True featheredge. Mold and mildew resistant.
ARDEX FEATHER FINISH® is an underlayment formulated from a blend of Portland cement and other hydraulic cements that provides a smooth, permanent finish for a variety of substrates prior to the installation of today’s demanding floor coverings, including sheet vinyl and VCT (vinyl composition tile).
Self-drying, finish underlayment
Provides a smooth surface prior to the installation of floor covering over a variety of substrates
A blend of Portland cement and other hydraulic cements
Exceptional bond strength
Easy to mix and apply
Mixes with water only
Superior coverage – up to 300 sq. ft. per bag*
Mold and mildew resistant
Install floor coverings in as little as 15 minutes
Interior use only
Installation Mixing Ratio: 2 1/2 quarts (2.4 L) of water per 10 lb. (4.5 kg) bag For smaller batches, use 2 parts powder to 1 part water by volume *Coverage: 16.7 sq. ft. per bag at 1/4” (1.5 sq. m at 6 mm) 33.3 sq. ft. per bag at 1/8” (3.09 sq. m at 3 mm) 100-300 sq. ft. (9.2-27.8 sq. m) per bag at a skim coat Coverage will vary depending on the texture of the surface being smoothed.
Performance Install Flooring: 15-20 minutes at 70°F (21°C) VOC: 0 Packaging: 10 lb. (4.5 kg) net weight bag Storage: Store in a cool, dry area. Do not leave bags exposed to sun. Protect unused material by removing air from bag and sealing tightly. Shelf Life: 9 months, if unopened.